Garrett · Single frequency detector

Garrett AT Pro

The AT Pro is an all-terrain detector from Garrett, submersible to 10 ft (3 m) as a whole. It shows target IDs from 0 to 99, with 40 levels of iron discrimination, and comes with MS-2 wired headphones.

Specs read Oct. 16, 2026 on garrett.comListed on Amazon as the detector alone

VLFSingle frequency, no kHz value

10 ftWaterproof

Not publishedWeight

AT Pro tech specsFacts from Garrett's product page, rewritten. A value Garrett does not publish is marked.
Technology	Single frequency
Frequencies	Not published
Waterproofing	detector submersible to 10 ft (3 m)
Weight	Not published
Coil	PROformance, 8.5 x 11-inch DD
Battery	4 x AA (included)
Battery life	Not published
Search modes	3 Standard audio modes, Pro, Electronic pinpointing
Target ID	0 to 99; 40 levels of iron discrimination
Display	LCD, not backlit
Headphones	MS-2 wired headphones
Warranty	3 years
Status	In the current range

Source: Garrett, AT Pro product page (opens in a new tab), read Oct. 16, 2026.

Source: Kellyco Metal Detectors, Garrett AT Pro, product page (detecting dealer; technology only) (opens in a new tab), read Oct. 16, 2026.

Not publishedFrequencies: Garrett's product page gives none; the manual is only offered through a file-sharing link we do not read.
Not publishedWeight: Not on the product page.
Not publishedBattery life: Not on the product page.

How it differs from its neighbors

The AT Max shares the 10 ft (3 m) rating and publishes its frequency, 13.6 kHz. It lists a target ID of 0 to 99, 8 levels of sensitivity and CS-3 Z-Lynk wireless headphones.

The AT Gold is the prospecting version. Garrett gives no kHz value, only "high frequency". It has a smaller 5 x 8-inch DD coil and 44 levels of iron discrimination. Its rating is 10 feet in fresh water.

None of the three AT product pages gives a weight, so we can't compare them on that.

AT Pro and AT Max compared
Spec	DetectorAT Pro	DetectorAT Max
Frequencies	Not published	13.6 kHz
Waterproofing	10 ftDetector, 3 m	10 ftDetector, 3 m
Weight	Not published	Not published
Battery	4 x AA (included)	4 x AA (included)
Target ID	0 to 99; 40 levels of iron discrimination	0 to 99
Display	LCD, not backlit	Backlit display
	View on Amazon AT Pro (opens in a new tab)Affiliate link	View on Amazon AT Max (opens in a new tab)Affiliate link

Facts from Garrett's page for each model, read Oct. 16, 2026.

Other Garrett models to compare

Three facts per model on one scale; open a card for its full spec sheet.

ATSingle frequency

AT Max

13.6 kHzFrequency

10 ftDetector

Not publishedWeight

Coil: Not published

View on Amazon AT Max (opens in a new tab)Affiliate link

ATSingle frequency

AT Gold

Not publishedFrequency

10 ftDetector

Not publishedWeight

Coil: PROformance, 5 x 8-inch DD

View on Amazon AT Gold (opens in a new tab)Affiliate link

VortexMulti-frequency

Vortex VX5

13 kHzFrequency

16 ftDetector

3 lbWeight

Coil: 11-inch DD

View on Amazon Vortex VX5 (opens in a new tab)Affiliate link

Questions about the AT Pro

Answered from Garrett's product page, read Oct. 16, 2026.

Yes. Garrett rates the detector submersible to 10 ft (3 m). It gives no water rating for the MS-2 wired headphones in the box.

Garrett does not publish it on the product page. For comparison, the AT Max lists 13.6 kHz.

Both are submersible to 10 ft. The AT Max publishes 13.6 kHz and comes with CS-3 Z-Lynk wireless headphones, where the AT Pro has MS-2 wired headphones.